Sure Grip Travel Bearing Press for Roller Skates

Easily install and remove roller skate bearings with this handy, dandy skate bearing press from Sure-Grip.

The Sure-Grip small bearing press is simple to use and ideal for those skaters who need to travel.

Big enough to handle your needs but small enough to fit in a skate bag.

Fitsboth 8mm and 7mmbearings.

This bearing puller is made for removing and installing bearings in quad roller skate wheels.

It can be used to remove bearings frominline wheels with an 8mm spacer but can’t be used to install bearings into inline wheels due to the size.

Not compatible with metal hub wheels.

Directions:

• To use the puller, start with the handle up and the long pin down (sideways)
• Then put the wheel on the outside, push the handle down and it pulls the bearing out
• Repeat to pull out the other bearing
• To use the press, stand the pin up and put a bearing down on the pin
• Next put the wheel with the outside of the wheel (usually the printed side) facing up and put another bearing on the pin
• Tip the pin down (sideways) and carefully pull the handle down
• You may have to guide the bearings a bit to get started
• Not to be used on aluminium hubs

Online Only

Brand: Sure-Grip